|
Floor surfacing paper, 120 grit roll, 12" x 150' (Part Number: 00160)
|
|
Floor surfacing paper, 150 grit roll, 12" x 150' (Part Number: 00161)
|
|
14" Floor scraper, steel handl
|
List Price $286.94
Our Price $220.94
Sale Price: $220.94
You Save $66.00!
|
|
|
List Price $286.94
Our Price $220.94
Sale Price: $220.94
You Save $66.00!
|
|
|
List Price $18.95
Our Price $15.74
Sale Price: $15.74
You Save $3.21!
|
|
|
|
|
|
# 3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs.
# Use for general sanding.
# Durable mineral on paper or combination backing.
# Fast cuts, better finish, longer life, time savings.
|
# 3M™ Resinite™ Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs.
# Use for general sanding.
# Durable mineral on paper or combination backing.
# Fast cuts, better finish, longer life, time savings.
|
|
|
|
|
Replacement blade for 14" scra
|
|
18" Floor scraper, steel handl
|
|
Replacement blade for 18" scra
|
List Price $8.60
Our Price $7.28
Sale Price: $7.28
You Save $1.32!
|
|
|
List Price $20.55
Our Price $17.31
Sale Price: $17.31
You Save $3.24!
|
|
|
List Price $8.91
Our Price $7.30
Sale Price: $7.30
You Save $1.61!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement blade for 22" scra
|
|
Leg extension kit for #10329
|
|
16" Universal Tote
|
Our Price $7.37
Sale Price: $7.37
|
|
|
Our Price
Sale Price: $90.59
|
|
|
List Price $31.26
Our Price $24.08
Sale Price: $24.08
You Save $7.18!
|
|
|
|
|
|
|
|
|
|
# Rigid frame with padded handle.
# Multiple pockets inside and out.
# Top straps secure 2 foot level or blueprints.
# Adjustable shoulder strap.
# Tools not included.
|
|
|
|
Nylon Screen-kut clamp
|
|
Corner-back clips, 1/2" (box of 300)
|
|
Corner-back clips, 5/8" (box oF 300)
|
List Price $15.65
Our Price $11.86
Sale Price: $11.86
You Save $3.79!
|
|
|
List Price $55.99
Our Price $39.99
Sale Price: $35.99
You Save $20.00!
|
|
|
List Price $55.99
Our Price $39.99
Sale Price: $35.99
You Save $20.00!
|
|
|
|
|
|
Screen-Kut TM Clamps securely fasten Screen-Kut TM Mesh sanding discs to the Porter Cable ® Drywall Sander. Screen-KutTM Mesh discs also offer significant savings over traditional foam-backed or Velcro® attached products...as both sides can be used to sand!
Smoother finish, faster sanding and nap does not raise.
|
# Prest-on Corner-back fasteners eliminate wood or steel stud backup at corners and ceilings.
# The result is faster framing and faster, easier drywall installation.
|
# Prest-on Corner-back fasteners eliminate wood or steel stud backup at corners and ceilings.
# The result is faster framing and faster, easier drywall installation.
|
|
|
|
Insta-back "Wall-Frogs", 1/2" (box of 200) (Part Number: 405)
|
|
Insta-back "Wal-Frogs", 5/8" (box of 200) (Part Number: 406)
|
|
Economy shovel, square point,
|
List Price $55.99
Our Price $39.99
Sale Price: $35.99
You Save $20.00!
|
|
|
List Price $55.99
Our Price $39.99
Sale Price: $35.99
You Save $20.00!
|
|
|
List Price $14.19
Our Price $10.77
Sale Price: $10.77
You Save $3.42!
|
|
|
|
|
|
# Eliminate the need to cut gypsum board back to the nearest stud.
# Make finished butt joints that are "bump free". No ridges or crowns!
# Reduce the number of joints to be finished, saving time and material.
# Install ceilings faster, easier and safer.
# Eliminate sagging wallboard between trusses.
# Make quick easy repairs because cutouts can be reattached without cutting back to the nearest stud.
|
# Eliminate the need to cut gypsum board back to the nearest stud.
# Make finished butt joints that are "bump free". No ridges or crowns!
# Reduce the number of joints to be finished, saving time and material.
# Install ceilings faster, easier and safer.
# Eliminate sagging wallboard between trusses.
# Make quick easy repairs because cutouts can be reattached without cutting back to the nearest stud.
|
|
|
|
|
Hammer-on flange clip, 1/8" - 1/4" (box of 100) (Part Number: 4H24)
|
|
Hammer-on flange clip, 5/16" - 1/2" (box of 100) (Part Number: 4H58)
|
|
Box (5,000) 20 Gauge 9/16" Wide 1/2" Crown Staples
|
List Price $45.84
Our Price $39.93
Sale Price: $39.93
You Save $5.91!
|
|
|
List Price $51.53
Our Price $39.08
Sale Price: $39.08
You Save $12.45!
|
|
|
List Price $7.53
Our Price $6.50
Sale Price: $5.71
You Save $1.82!
|
|
|
|
|
|
# Locates a "portable" 1/4" hole with just a hammer.
# Installs easily regardless of insulation materials on beam flange.
# Fits most beams and bulb tees.
# For providing a "portable" hole on most size beams and bulb tees.
|
# Locates a "portable" 1/4" hole with just a hammer.
# Installs easily regardless of insulation materials on beam flange.
# Fits most beams and bulb tees.
# For providing a "portable" hole on most size beams and bulb tees.
|
* Gauge: 20 ga.
* Wire Size: .050"
* Crown: 1/2"
* Point: Chisel
* Metal: Galvanized, Standard Tensil
* Length: 9/16"
* Qty / Box: 5,000
|
|
|
|
3/8" wide crown staples(5000),
|
|
Box (5,000) 20 Gauge 1/2" Wide 1/2" Crown Staples
|
|
Box (5,000) 20 Gauge 9/16" Wide 1/2" Crown Staples
|
List Price $9.54
Our Price $7.24
Sale Price: $7.24
You Save $2.30!
|
|
|
List Price $10.11
Our Price $7.67
Sale Price: $7.67
You Save $2.44!
|
|
|
List Price $10.61
Our Price $8.05
Sale Price: $8.05
You Save $2.56!
|
|
|
|
|
|
* Gauge: 20 ga.
* Wire Size: .050"
* Crown: 3/16"
* Point: Chisel
* Metal: Galvanized,Standard Tensil
* Length: 9/16"
* Qty / Box: 5,000
|
* Gauge: 20 ga.
* Wire Size: .050"
* Crown: 1/2"
* Point: Chisel
* Metal: Galvanized, Standard Tensil
* Length: 1/2"
* Qty / Box: 5,000
|
* Gauge: 20 ga.
* Wire Size: .050"
* Crown: 1/2"
* Point: Chisel
* Metal: Galvanized, Standard Tensil
* Length: 9/16"
* Qty / Box: 5,000
|
|
|
|
Monster Hook tool holder
|
|
3/8 galvanized staples(5000)
|
|
1/4" Staples for R19, (5000 ea
|
List Price $8.86
Our Price $6.79
Sale Price: $6.79
You Save $2.07!
|
|
|
List Price $5.43
Our Price $4.11
Sale Price: $4.11
You Save $1.32!
|
|
|
List Price $3.22
Our Price $2.44
Sale Price: $2.44
You Save $0.78!
|
|
|
|
|
|
# Holds most cordless drills, nail guns, gardening tools and many other items.
# Designed for left or right handed use.
# Rotates 180 degrees.
|
Used for construction-related applications where broad holding power is required.
|
Used for construction-related applications where broad holding power is required.
|
|
|
|
Angle clip only (100 per box) (Part Number: AC1)
|
|
Angle clip with 1" pin, ( 100 PACK)
|
|
Z purlin clip (box of 100) AF14
|
List Price $7.73
Our Price $5.95
Sale Price: $5.95
You Save $1.78!
|
|
|
List Price $10.49
Our Price $10.59
Sale Price: $10.59
|
|
|
List Price $42.79
Our Price $33.00
Sale Price: $29.12
You Save $13.67!
|
|
|
|
|
|
|
Interchangeable with all brands of drive pins and clips.
|
Ramset Ceiling Clip Assemblies are designed for suspended ceiling and other overhead applications. Special dimples on the angle clip act as a shim and assure a snug fit between the structural member and the clip. Ramset powder fasteners are specifically fabricated to meet the exacting requirements of toughness and durability needed to penetrate dense concrete and structural quality steel.
* Designed for suspended ceiling and other overhead applications
* Pin is preassembled to a 14 gauge angle clip for applications such as hanging ceiling wire to support ceiling grid.
* Special dimples on the angle clip serve as a shim and guarantee a snug fit between the structural member and the clip.
* Able to penetrate dense concrete and structural quality steel
|
# Profiles of 1.5 to 6 mm thickness
# EPZ corrosion protection
# Can be used in combination with HSC Snap Clips
|
|
|
|
1/4" staples for JT21, (1000) sold in multiples of 5 only (Part Number: AR214)
|
|
5/16" staples for JT21 (1000) sold in multiples of 5 only (Part Number: AR215)
|
|
1/4" staples for T50, (1250) sold in multiples of 4 only (Part Number: AR504)
|
List Price $2.15
Our Price $1.75
Sale Price: $1.75
You Save $0.40!
|
|
|
List Price $2.15
Our Price $1.75
Sale Price: $1.75
You Save $0.40!
|
|
|
List Price $2.71
Our Price $2.20
Sale Price: $2.20
You Save $0.51!
|
|
|
|
|
|
|
|
|
|
|
|
|
5/16" staples for T50, (1250) sold in multiples of 4 only (Part Number: AR505)
|
|
3/8" staples for T50, (1250) sold in multiples of 4 only (Part Number: AR506)
|
|
3/8" staples for T50, (5000) (Part Number: AR506IP)
|
List Price $2.77
Our Price $2.24
Sale Price: $2.24
You Save $0.53!
|
|
|
List Price $3.19
Our Price $2.60
Sale Price: $2.60
You Save $0.59!
|
|
|
List Price $12.31
Our Price $10.03
Sale Price: $10.03
You Save $2.28!
|
|
|
|
|
|
|
5/16" staples for T50, (1250) sold in multiples of 4 only (Part Number: AR505)
|
|
# Perfect for use with TWA and low voltage wire.
# Most 1/4" thick items hold well with 3/8" staples.
|
|
|
|
1/2" staples for T50, (1250) sold in multiples of 4 only (Part Number: AR508)
|
|
9/16" staples for T50, (1250) sold in multiples of 4 only (Part Number: AR509)
|
|
Suspended ceiling isolation ha
|
List Price $3.32
Our Price $2.68
Sale Price: $2.68
You Save $0.64!
|
|
|
List Price $3.65
Our Price $2.96
Sale Price: $2.96
You Save $0.69!
|
|
|
List Price $6.82
Our Price $5.18
Sale Price: $5.18
You Save $1.64!
|
|
|
|
|
|
|
Perfect for use with the T50 stapler.
|
|
|
|
|
|
Arrow 10.8v Lithium-Ion Battery Pack CT50K
|
|
DISPLAY HANGERS, 2 PART, RIGHT AND LEFT, WHITE 100 COUNT BOX
|
|
Battery charger for CT50K
|
Our Price $50.34
Sale Price: $50.34
|
|
|
List Price $109.99
Our Price $89.99
Sale Price: $79.99
You Save $30.00!
|
|
|
Our Price $37.87
Sale Price: $37.87
|
|
|
|
|
|
|
|
DISPLAY HANGERS, 2 PART, RIGHT AND LEFT, WHITE 100 COUNT BOX
|
|
|
|
|
Duo-Fast CS-5000 Wide Crown Fine Wire Stapler
|
|
Arrow CT50, 10.8v Lithium-Ion Cordless Staple Gun Kit w/Charger & Case – CT50K
|
|
Hammer tacker, professional grade, Hi-Viz yellow (Part Number: HT50P)
|
List Price $65.47
Our Price $49.65
Sale Price: $49.65
You Save $15.82!
|
|
|
Our Price $139.16
Sale Price: $139.16
|
|
|
List Price $53.37
Our Price $42.42
Sale Price: $42.42
You Save $10.95!
|
|
|
|
|
|
Technical Details
* Fully adjustable power setting
* Lightweight, 1.8 lbs
* Rear loading magazine
* Wire Size: .050"
› See more technical details
Product Description
Product Description
Gauge: 20 Crown: 1/2" Length: 1/4" - 9/16"
Product Details
* Product Dimensions: 9 x 1.2 x 9.2 inches ; 2.2 pounds
|
|
# All steel construction
# High carbon hardened steel working parts
# Patented Jam proof mechanisms
# Precision locked rear loading
# Retractable striking edge
# Specially designed power grip handles
# Durable chrome finish
|
|
|
|
Classic Hammer Tacker
|
|
Junior tacker (Part Number: JT21)
|
|
Eye lag & toggle assembly, 1/4
|
List Price $95.91
Our Price $72.77
Sale Price: $72.77
You Save $23.14!
|
|
|
List Price $17.86
Our Price $13.55
Sale Price: $13.55
You Save $4.31!
|
|
|
List Price $0.48
Our Price $0.37
Sale Price: $0.37
You Save $0.11!
|
|
|
|
|
|
Heavy Duty Hammer
1/4” & 5/16” staples in stock!
|
# All chrome finish
# Jam proof mechanism
# Hand contoured handle
# Built in staple lifter
# Visual refill window
|
|
|
|
